Safety Systems Distribution

Telephone 0800 3282950

accessories

adding even more functionality to your Intercall system

In addition to the standard units which are available for all Intercall systems, there is also a wide range of accessories which have been specifically designed to make your system more adaptable for a variety of needs.

In particular the range includes the accessories below which enable patients with virtually every level of disability to use the system with ease.

In addition to the standard range of accessories, we also manufacture bespoke accessories to suit a particular requirement. To find out more about these please contact us.

NP2 and NP4 pear leads

– if a resident needs access to your call system when they are away from their call point, these attractively styled pear leads are the perfect solution. They are available in 2-metre and 4-metre lengths and the right-angled jack plug reduces the chance of damage by furniture movement. Each unit is supplied complete with a clip fastener, so the unit can be attached to clothing or bed sheets if necessary. In the event that a lead is pulled out of its socket, a standard alarm call is generated.

BC1 breath switch

– even the most severely handicapped people can have access to your call system with the
BC1 Breath Switch. It operates in a similar way to the pear leads and the air switch above, by generating a standard call, and plugs into the jack on all Intercall call points. It is supplied with detachable mouth-pieces which can be sterilized.

bed monitor

– the Bed Monitor device is located under the mattress on the resident’s bed to activate the call point when the resident gets out of bed. It is designed to be wiped clean and should be replaced periodically in accordance with the manufacturer’s instructions.

CS1 ceiling pull switch

– specifically developed to give alarms from bathrooms and toilets. The unit is ceiling mounted and features a floor length cord terminated with two easy to use G loops. It also incorporates twin integral reassurance indicators, which flash to confirm a call has been generated.

door contact

– contacts can be configured to monitor the resident’s bedroom, bathroom and patio doors and raise an alarm immediately the resident leaves the room. To activate the unit, doors are fitted with an unobtrusive switch device to detect when the door is opened - these can be fitted to the standard bed head unit or to a dedicated call point.

recording activity

- all resident activity can be monitored and recorded using the call loging printer. This allows resident movement to be analysed and a hard copy print obtained.

S2 water resistant air switch

– the S2 Air Switch is ideal for environments such as bathrooms and showers where water could make contact with the system. It is totally sealed and waterproof and, since it uses air to trigger a call,
it is completely safe to use. The S2 Air Switch is fitted with a clip fastener so it can be attached easily to a shower curtain or towel, and the unit will generate a standard call should it be removed from the jack socket.

PM1 pressure mat

– the PM1 is a standard pressure mat which activates a standard call when pressure is applied to the mat. It should only be placed under a mat or carpet as it is not designed to be walked on directly. It is supplied complete with a four-metre lead and a right angled jack plug. The surface area of the mat measures 300 x 600 mm.

BRAVO alphanumeric pagers

– for applications where you need to connect alphanumeric pagers to the system,
the L747 Universal Interface offers simple, convenient connections. The pagers display all calls made on the system as they would appear on the display unit, showing the exact location of each call in full alphanumeric text. With the CMS Lite PC Software, you can configure your system to allow individual pagers to respond to specific calls, making it possible to either zone the building by area, or by call type. There is also a day/night mode available so that pagers can be programmed to respond to different calls at set times during the day or night.

PIR1 passive infra red bed monitor

– if you need to monitor a resident’s bed and alert staff when he or she is on the move, the PIR1 bed monitor will detect movement and alert the staff. However, the bed itself is ‘masked’ out of the range of the detector so that it only monitors movement outside the bed area. Any movement within the receiver’s range will activate a call, and trigger the call point.

CMS lite call management software

– if you need to record and store all Intercall system activity on your personal computer, the CMS Lite Call Management software is the ideal solution. It gives you immediate access to the call history of a resident, so you can maintain more accurate and timely control of your entire care home. Staff pagers can also be controlled from your computer, allowing free text messages to be sent to individual pagers.

radio fobs for greater freedom

If greater range of transmission is required or infrared call points are not installed a wrist or neck radio pendant can be incorporated to any call point.

This will typically allow a resident to move up to 30 metres from a room and still be able to raise an alarm where required.

Used in conjunction with an LE9 receiver

EMFIT bed exit and epilepsy sensors

All of the EMFIT range are compatible with the Intercall product range - see the product pages for full information.