



Telecare - Careline Anna
Home > STT Condigi Telecare - Dispersed Living Alarms
Careline ANNA & GSM
STT Condigi Carephone exists in several variants to be able to communicate in multiple ways. This product sheet describes the two analogue models: Careline Anna and Careline GSM. (When both models are referred it states Careline Anna / GSM.)
Careline Anna / GSM uses the STT Condigi patented frequency
jumping solution for 869 MHz-868MHz and is also available as Class 1 certified
device. Additional key security features include link test, which checks the
connection between the Carephone and the emergency transmitters as well as the
two-way communication with an active alarm acknowledgement.
Careline Anna / GSM can transmit both speech and nonspeech
alarms, to 10 different pre-programmed alarm receivers via the analogue
telephone network and / or GSM network. The Careline GSM can also send alerts to
8 different alarm receivers via GPRS. The alarm receiver can then send the
alarm, for example, to mobile phones, local DECT-phones or an alarm central,
depending on time and date. Predetermined sequences help to dial to the various
emergency beneficiaries and may differ depending on the alarm type. The
Carephone is equipped with both a microphone and a speaker and can be used as
speakerphone, which allows calls with no additional interaction from the user
side following the alarm activation.
Apart from the alarm transmitter, TX4, Careline Anna / GSM
can be connected to additional radio alarm transmitters such as door, motion or
smoke alarms. In total, 16 radio-based devices can be connected at once. Wired
alarms can also be used with the T-box 869 or via an additional card in the
Carephone (note that this requires a special implementation of a socket in the
Careline Anna)
Careline Anna / GSM enables registering of presence / action / ready which is easy and fast to configure. The programming is performed with a HT-III, or via PC programming.


Product Home Page | Components | ANNA | Cooker Guard