QT412RXA IR/RF Transmitter (push/pull for attack)

QT412RXA IR/RF Transmitter (push/pull for attack)

SKU:
QT412RXA
£112.98
Width:
4.50 (cm)
Height:
11.50 (cm)
Depth:
2.50 (cm)
Description

Rechargeable IR/RF Transmitter (push/pull for attack)

 QT412RXA

  • Allows staff working in high-risk environments to remotely trigger an Attack call via a Quantec infrared call point, ceiling receiver or radio receiver
  • Can also be used on 800 Series call systems to trigger Standard and Emergency calls via an 800 Series infrared receiving device.
  • 10m line-of-sight IR transmitting range.
  • Radio coverage dependent on the Quantec receiving device used.
  • Includes a Karabiner clip for attaching to staff uniforms.
  • Calls are triggered by pulling the transmitter's retaining clip or activating one of its two buttons.
  • Can be recharged using a QT424/1 single-way or QT424/10 ten-way charging unit.
  • Can be programmed to generate different call levels using a QT423 configurator.
  • Transmitters used on Quantec systems can also be programmed to include a unique User ID/name.
Compatibility Compatible with C-TEC's Quantec and 800 Series call systems.
Type Infrared/Radio (when used on a Quantec system); Infrared when used on an 800 Series system).
Coverage 10m line-of-sight infrared coverage (940nm modulated @ 38 Khz); 60m typical radio coverage dependent on environmental factors (RF868.3 MHz).
Max battery size and type Includes an internal rechargeable NiMHydride battery (non-user serviceable). Can be charged using a QT424/1 or QT424/10 single or 10-way charging unit.
Controls Karabiner pull clip and two buttons (activating any triggers an Attack call in the transmitter's defauts state). Pull clip actuation force is 1.5 kg (15 Newtons).
Connections Red/green confidence LED/battery status indicator.
Product dimensions (mm) 45 W x 115 H x 25 D mm.
Construction & finish TBC.
IP Rating IP41.
Weight 78g.
Operating conditions/temperature -5ºC to +40ºC. Max. relative humidity 95% non-condensing.
Notes The transmitter's operation can be tailored to suit a specific site using a QT423 Configurator. Programming options depend on whcih system it is used on (Quantec or 800 Series). Refer to the device's instructions for details.
Related Products