Shop

LED Over Door Lights provide an instant visual aid to nursing staff for alerts and calls from patient rooms. Located outside patient rooms and along corridors, the Over Door Light gives clear visual status and improved awareness of the alert. Includes a...

The Controller is the heart of the nurse call system, providing power to the Extra Low Voltage devices on the secure 2 wire Intercall Bus network, and an ethernet link to the LAN for system programming and automatic call logging. SecurityPassword...

The Corridor Display is an advanced call information system which is ideal for hospitals or larger care facilities. The metre wide information panel can be wall or ceiling mounted in corridors to provide a quick, clear call indicator to busy nursing...

The Touch RFID Care Card Programmer is designed to quickly and easily program user ID numbers onto the Intercall 904 Care Card. It is a USB device that connects to a PC or laptop and is supplied with the Care Card Programmer software...

The Touch Accessory Programmer is designed to quickly and easily program user names and configuration settings into the Intercall Touch range of portable accessories including: 980 Accessory Transmitter 982 Wristband Transmitter 983 Neck...

Protects the output from the Touch controller, providing four current limited outputs to distribute the wiring for the nurse call system. ProtectionFuse protected outputs for fault isolation StatusSystem healthy status reassurance LED AddressableDIP...

PoE version of the nurse call system Touch Controller supporting up to 15 devices. Generally used in conjunction with the automated light guidance dementia system as the hub. Or alternatively used for small systems with less than 15 network...

The Safeguard point is used to control the monitoring functions within a bedroom. Its sleek wall mounted design allows this unit to be either positioned either side of a bedroom door for simple staff operation. The Safeguard Point is used to alert...

For use with the Net2 system. Pack of 10 clamshell cards. Installation To issue a token the user’s details are entered using the PC software. The token number is then entered by presenting the token to the desktop reader. Operation Once...

Net2 proximity ISO cards are for use with the Net2 system. Pack of 500. Installation To issue a token the user’s details are entered using the PC software. The token number is then entered by presenting the token to the desktop reader...

The Net2 plus control unit connects to the central administration PC using an RJ45 plug into a standard TCP/IP Ethernet network. This greatly increases the flexibility of installation options on sites that have LAN/WAN networks. The Net2 plus control...

The Net2 plus control unit connects to the central administration PC using an RJ45 plug into a standard TCP/IP Ethernet network. This greatly increases the flexibility of installation options on sites that have LAN/WAN networks. The Net2 plus control...

K series stainless steel keypads are for use with Switch2 and Net2 systems. The keypad has a robust metal construction. Installation The keypad is wired as shown on the control unit label. The cable exits centrally from the back of the keypad making...

The Proximity metal reader is for use with Switch2 and Net2 systems. It is contained in a cast metal housing with a satin chrome finish. The result is a smart, rugged reader. As the reader is already housed in metal, its operation is affected less by...

The 12V dc G Range, N Series power supplies has been designed for CCTV, access control and general purpose applications that require the use of a standby battery. This range has a regulated highly stable output supplying full rated current to load, plus...

The Intelligent Input/Output Module is used to monitor two single pole, volt free contact inputs and control mains switching relay output contacts.  EN 54-17 & EN 54-18 Certified Two input channels Meets BS 7273-4 failsafe...

The beating heart of the Touch nurse call system, providing the power for the Touch devices and the link to the IP network for system programming and automatic call logging. SecurityPassword protected access and back up battery. ProgrammingIntuitive...

The multi functional wearable allows the user to make a call, as well as alerting staff if they suffer a fall.

The Display Panel features a large, clear, wide viewing angle display with volume control, standby battery and fitted on a swivel bracket.

The Altra MiniTouch is ideal for communal areas, allowing staff to view multiple calls on screen at once and enabling them to decide the most appropriate response. Can be flush mounted on the wall or fitted on a swivel bracket.

The Altra Touch gives you the ability to personalise your Nurse Call System, enabling you to safeguard your home / hospital by managing your call data for evidencing.

Infrared Patient Wrist Pendant (push for call) Part No. QT432W Allows patients in bedrooms and communal areas to remotely trigger standard calls via a Quantec infrared call point, ceiling receiver or radio receiver Supplied on an...

Infrared Attendance Pendant (push for attendance) Part No. QT432A Allows nursing or security staff entering rooms during night shifts, etc., to log their attendance. Upon activation, the infrared call point or ceiling receiver that picks up...

Rechargeable IR/RF Transmitter (push for call, pull for attack) Part No. QT412RXCA Allows staff to remotely trigger Attack and Standard calls via a Quantec infrared call point, ceiling receiver or radio receiver. Can also be used on 800...

Rechargeable IR/RF Transmitter (push/pull for attack) Part No. QT412RXA Allows staff working in high-risk environments to remotely trigger an Attack call via a Quantec infrared call point, ceiling receiver or radio receiver Can also be used...

TA74 series: Carefree living with innovative carephone technology The TeleAlarm TA74 GSM carephone has been developed for people who lead an independent life in their own home, but who want the feeling of security that help is always at hand when it is...

Addressable Radio Receiver Units are used in external areas where infrared coverage is not available. Housed within a metal IP65 rated weatherproof enclosure, these receivers offer superb reliability. This personal alarm system component is housed...

The Touch Display Plus has all the functionality of our Touch Display, with the addition of a full duplex VoIP speech device. Perfect for larger hospitals or smaller care residences, the Touch Display Plus is the central hub of the Touch Series nurse...

Description The QTPT pager transmitter can be used in conjunction with a nurse call or staff attack system to provide notification of calls to busy staff on the move. Using a portable pager worn on the belt, staff will receive visual and audible alerts...

The Call Point Plus has all the functionality of the Call Point Standard, with the addition of a full duplex VoIP speech device. The Call Point Plus is ideal for use in most care environments, from larger hospitals to residential care homes and assisted...

Personal Activation Devices are worn by all members of staff that require protection. Infrared Transmitter STC8 also has a radio transmitter and aerial built into the unit Confidence LED Push button activator - call level 1 Snatch pin - call level 2...