QT412RXCA IR/RF Transmitter (push for call, pull for attack)

QT412RXCA IR/RF Transmitter (push for call, pull for attack)

SKU:
QT412RXCA
£112.98
Width:
4.50 (cm)
Height:
11.50 (cm)
Depth:
2.50 (cm)
Description

Rechargeable IR/RF Transmitter (push for call, pull for attack)

 QT412RXCA

  • Allows staff to remotely trigger Attack and Standard calls via a Quantec infrared call point, ceiling receiver or radio receiver.
  • Can also be used on 800 Series call systems to trigger Standard and Emergency calls via an 800 Series infrared receiving device.
  • 10m line-of-sight IR transmitting range.
  • Radio coverage dependent on the Quantec receiving device used.
  • Includes a Karabiner clip for attaching to staff uniforms.
  • Calls are triggered by pulling the transmitter's retaining clip or activating one of its two buttons.
  • Can be recharged using a QT424/1 single-way or QT424/10 ten-way charging unit.
  • Can be programmed to generate different call levels using a QT423 configurator.
  • Transmitters used on Quantec systems can also be programmed to include a unique User ID/name.
Compatibility Compatible with C-TEC's Quantec and 800 Series call systems.
Type Infrared/Radio (when used on a Quantec system); Infrared when used on an 800 Series system).
Coverage 10m line-of-sight infrared coverage (940nm modulated @ 38 Khz); 60m typical radio coverage dependent on environmental factors (RF868.3 MHz).
Max battery size and type Includes an internal rechargeable NiMHydride battery (non-user serviceable). Can be charged using a QT424/1 or QT424/10 single or 10-way charging unit.
Controls Karabiner pull clip (activation triggers an Attack call) and two buttons (activation triggers a Standard call). Pull clip actuation force is 1.5 kg (15 Newtons).
Connections Red/green confidence LED/battery status indicator.
Product dimensions (mm) 45 W x 115 H x 25 D mm.
Construction & finish TBC.
IP Rating IP41.
Weight 78g.
Operating conditions/temperature -5ºC to +40ºC. Max. relative humidity 95% non-condensing.
Notes The transmitter's operation can be tailored to suit a specific site using a QT423 Configurator. Programming options depend on whcih system it is used on (Quantec or 800 Series). Refer to the device's instructions for details.
Related Products