Nurse Call Systems

Used within the building, normally on the 1st floor, to build a radio footprint to the desired parameters of the system. The RTX then enables receivers and transmitters to be installed anywhere within those parameters or radio footprint. Technical...

This lightweight pendant has the option of being worn either around the neck on a lanyard or with a MED103 watch strap. It is a portable nurse call product which can be programmed to transmit either a call, assistance or emergency type of event,...

The HTM6018 pear push lead is manufactured with an Anti-Microbial additive in both the enclosure and lead with built in suspension and safety snap, this design is both compliant and durable. Operation of the device activates a normal call on the...

The HTM6500iBiR model is supplied with a pull cord and two sockets as standard. This model also encompasses the iButton, offering staff attendance and identification. Socket 1 is used for a wide variety of assistive technology, such as floor mats, PIR...

Designed for all areas where a care call point is needed, the Connect Call Room Unit allows calls from users and staff. There are four buttons on the Connect Call Room Unit; these can be altered to suit your needs but in a standard setup...

Green reset token for use with the HTM6500iB range or call points and door monitors. Staff carry this token with them and use it to operate and answer the call system. Contains 1 x reset token.

Designed with all the features of the popular Care Cards, including staff identity, data logging and NFC technology for easy software updates and enhanced security. The Care Tokens are small, neat, and conveniently sized for discreet carrying. Care...

Replacement for 22089 which is now discontinued. This Connect Wear pendant comes with a wrist or neck anti-ligature lanyard, giving you flexibility in tailoring your approach to care and offering independence to your residents. The pendant is IP67 rated...

Pack of 10 elastic wrist straps with plastic fastener. Ideal for wrist fobs and transmitters where the existing strap has become damaged or lost its elasticity. The strap has a soft and smooth finish making it ideal for elderly users and those with more...

How does it work? The Wireless Alerta Detect uses infrared technology to activate the alarm when body movement is detected within the range of the infrared beam. The Wireless Alerta Detect is most effective when mounted at...

How does it work? The Wireless Alerta Button is supplied with a wall mountable holder that can be mounted to a wall or bedside unit for holding the Wireless Nurse Call Button meaning it is always in one place if the user is bed...

How does it work? The Alerta Wall Point Receiver can be connected to a nurse call system for centralised activation, or used on its own, independent of a nurse call system to give localised alerts through this device only. The volume can be deactivated...

The Alerta Wireless Transmitter is used with the following wireless products: Floor+ Alertamat, Bed Alertamat and Chair Alertamat. It uses radio frequency technology to connect, with a wireless range of up to 95 metres. Once paired with the Alerta Wall...

How does it work? This Alerta Wireless Floor sensor mat has a luxury carpet finish, helping it to blend into the room and providing the client with a soft and familiar surface to stand on. It raises an alarm when the client steps on the mat, for...

How does it work? The Alerta Wireless Floor sensor mat raises an alarm when the client steps on the mat, for instance when they have left their bed or chair and have begun to wander. As soon as they step onto the mat, an alarm is raised. As this is a...

How does it work? The Alerta Wireless Chair Mat raises an alarm when the client leaves their chair and begins to wander. As this is a wireless system, there are no trailing wires to trip up residents or get in the way! The chair mat sends a signal...

How does it work? The Alerta Wireless Bed Mat raises an alarm when the client leaves their bed and begins to wander. As this is a wireless system, there are no trailing wires to trip up residents or get in the way! The bed mat sends a signal wirelessly...

Our 25m roll of replacement pull cord string has a durable wipe clean coating impregnated with antimicrobial technology.  The non-PVC polymer coating can be used with standard cleaning products or disinfectants and the inbuilt protection provides...

Hi-Output Addressable Sounder Part No. QT688/2 A programmable hi-output addressable sounder operating at up to 85dB(A). Designed to increase call indication levels in large Quantec sites. Can be configured to sound when certain...

Type a description for this product here...

Quantec Network Splitter Part No. QT603 An essential wiring/installation aid for C-TEC's Quantec Addressable Call System. Helps protect against open and short circuit faults and reduces the risk of volt drop. Includes one input and...

Quantec Interface Unit c/w Remote Socket Part No. QT636 Allows any device with a normally open or normally closed 6.35mm (1/4 inch) jack plug to be connected to Quantec. Particularly suited for use with our NC805MD Portable Movement...

Quantec Radio Receiver Part No. QT422RX Designed for use with Quantec’s QT412 & QT432 range of infrared/radio transmitters and pendants. Operates at radio frequency (RF) 868.3 MHz, Allows standard, help required, emergency and/or...

Quantec Slave Infrared Ceiling Receiver (Round Version) Part No. QT302RXRS An unobtrusive white round slave infrared receiver. Connects to a master Quantec infrared receiving device to increase IR coverage. Designed to accept infrared...

Quantec Master Infrared Ceiling Receiver (Round Version) Part No. QT302RXR An unobtrusive white round version of our Quantec Master Ceiling Receiver. Designed to accept infrared calls from compatible Quantec staff attack transmitters,...

Quantec Master Infrared Ceiling Receiver Part No. QT302RX Designed to accept infrared calls from compatible Quantec staff attack transmitters, patient neck/wrist pendants and staff attendance pendants. Typically used in bedrooms, corridors,...

Quantec Slave Infrared Ceiling Receiver Part No. QT302RXS Connects to a master Quantec infrared receiving device to increase IR coverage. Accepts infrared calls from compatible Quantec staff attack transmitters, patient neck/wrist pendants...

Quantec PIR Power Interface c/w Isolating Keyswitch Part No. QT645 Allows up to two QT638 PIR movement sensors to be connected to a Quantec addressable call system. Connects to the slave input on a QT602 or QT609 Range Call Point...

Quantec Monitoring Point, Button Reset Part No. QT604 A keyswitch-isolatable monitoring point c/w a RESET button for cancelling calls. Can be configured to generate a Standard or Emergency call when a fire exit or drug cupboard is...

Quantec Accessible Disabled Persons Toilet Alarm Kit Part No. QT951 A cost-effective expansion kit that adds true BS8300 compliant accessible toilet alarm functionality to a Quantec Addressable Call System. Includes a QT607 ceiling pull...

Quantec Corridor Display (no controls) Part No. QT608CD A 16 character x 2 line display used to indicate incoming calls in corridors, staff rooms, nursing stations, etc. Shows call type, call location and (depending on the device used to...

Quantec Surveyor Data Management Software Part No. QT707S Allows detailed reports on all aspects of a Quantec system’s call activity to be sent direct to a PC’s desktop. Provides valuable information on call history,...

Quantec Programming Software Part No. QT707 PC programming tools for use with C-TEC's Quantec addressable call system. Intuitive and easy-to-use with comprehensive Help files. Requires a PC running Windows XP, Vista, 7 or 8. Kit includes...

Flush Mounting Bezel for QT601-2 Quantec Controllers Part No. QT385 Allows Quantec Controllers to be semi-flush mounted. Attractive slimline design. Finished in mild steel. Front face when in situ measures 456 W x 293 H mm...

Quantec Controller Part No. QT601-2 Supplies power to and controls a Quantec Addressable Call System. Monitors all network devices and manages the routing and distribution of all calls. Provides connections for network wiring, standby...

Quantec Configurator Part No. QT423 Allows compatible Quantec call points, sounders, infrared transmitters and universal interface devices to be individually programmed to suit the requirements of individual sites. Can also be used to...

Slave Overdoor Light c/w Sounder Part No. QT606S Provides audible and visual indication of calls made from a Quantec call point outside bedrooms, WCs, etc. Flash and sounder rates change/intensify to reflect the urgency of the...

Slave Overdoor Light Part No. QT606 Provides visual indication of calls made from a Quantec call point outside bedrooms, WCs, etc. Flash and colour sequence changes/intensifies to reflect the urgency of the incoming call.  Dual...

Quantec Corridor Display Part No. QT608C A 16 character x 2 line display used to indicate incoming calls in corridors, staff rooms, nursing stations, etc. Includes an onboard sounder and buttons to accept, scroll...

Quantec Addressable Infrared Call Point, Button Reset c/w Sounder (No Remote) Part No. QT609RS A programmable Quantec addressable call point c/w infrared receiver and call follower sounder. Includes a Call button, Reset button and...