Nurse Call Systems

Stainless Steel Emergency Assistance Alarm Kit Part No. NC951/SS A high-quality brushed stainless steel single zone emergency assistance alarm. Attractively designed, easy to install and simple to use. Allows a distressed person to...

The Medicare ceiling mounted pull cord pairs with any call point to reset the call, ideal for use in bathrooms. Technical Information Dimensions 96 x 96 x 3cm with 3m anti-ligature pull cord (wipe clean) Cord: Anti-ligature pull cord which snaps...

Pack of 10 magnetic reset tokens for the Quantec and 800 Series nurse call system. Comes with a handy keyring attachment. Used to reset call points and door monitor points that use a magnetic reset button.

The Access Point is a simple, cost effective, wireless ID security system. Using Radio Frequency Identification technology (RFID), the Access Control Point allows hospitals and care facilities to control access to sensitive and restricted areas. The...

This lightweight pendant comes with a wrist or neck anti-ligature lanyard, giving you flexibility in tailoring your approach to care and offering independence to your residents. The pendant is IP67 rated and is both water resistant and dust-proof.

The Door Contact is installed onto the door and activates when the door is opened. A key operator timer system gives staff the ability to pass through the door without it alarming.

The Touch Display is the heart of the Intercall Touch Series. Perfect for larger hospitals or smaller care residences, the Touch Display is the central hub of the Touch Series nurse call system. Ideally installed on a desk or wall mounted, the Touch...

How does it work? The Alerta Wireless Bed Mat raises an alarm when the client leaves their bed and begins to wander. As this is a wireless system, there are no trailing wires to trip up residents or get in the way! The bed mat sends a signal wirelessly...

Quantec Network Splitter Part No. QT603 An essential wiring/installation aid for C-TEC's Quantec Addressable Call System. Helps protect against open and short circuit faults and reduces the risk of volt drop. Includes one input and...

Quantec Corridor Display (no controls) Part No. QT608CD A 16 character x 2 line display used to indicate incoming calls in corridors, staff rooms, nursing stations, etc. Shows call type, call location and (depending on the device used to...

Quantec Surveyor Data Management Software Part No. QT707S Allows detailed reports on all aspects of a Quantec system’s call activity to be sent direct to a PC’s desktop. Provides valuable information on call history,...

Quantec Programming Software Part No. QT707 PC programming tools for use with C-TEC's Quantec addressable call system. Intuitive and easy-to-use with comprehensive Help files. Requires a PC running Windows XP, Vista, 7 or 8. Kit includes...

Quantec Controller Part No. QT601-2 Supplies power to and controls a Quantec Addressable Call System. Monitors all network devices and manages the routing and distribution of all calls. Provides connections for network wiring, standby...

Quantec Addressable Infrared Call Point, Button Reset c/w Sounder (No Remote) Part No. QT609RS A programmable Quantec addressable call point c/w infrared receiver and call follower sounder. Includes a Call button, Reset button and...

Quantec Addressable Call Point, Button Reset (No Remote) Part No. QT609 A programmable Quantec addressable call point. Includes a Call button, Reset button and red/green confidence light. Can make up to 5 levels of call -...

A stylish mobile call device paired to the nurse call system, comfortably worn around the neck with safety breakaway cord, providing discreet, reassuring confidence to the user, free to enjoy life. The neck pendant requires an infrared enabled call point...

LED Over Door Lights provide an instant visual aid to nursing staff for alerts and calls from patient rooms. Located outside patient rooms and along corridors, the Over Door Light gives clear visual status and improved awareness of the alert.

Designed to be attached to a client’s pillow, the soft activation switch can generate a call by gently pressing the cheek or head against the foam pad. Perfect for clients who are unable to use conventional call aids such as buttons and...

L617 Power Supply Unit The main controller for an older 600 system Requires 240v fused spur Requires an LBAT 2.2aH back up battery For use only on pre-2003 systems Available to special order only Technical Information Installation: Surface mount in...

L714 Remote sounders are designed to boost audibility of display panels throughout the home Each sounder can be zoned to only alarm for particular rooms if required. Remote sounders are commonly used where only additional sound is required as opposed to...

The HTM6500E model has a red emergency pull switch and is HTM compliant. The model is also supplied with a pull cord and two sockets as standard. Socket 1 is for use with a wide variety of assistive technology, such as floor mats, PIR triggers and...

Using the latest in low power LCD technology, the discreet alarm panel features a crystal-clear backlit call display with user controls to scroll nurse call activity clearly in order of alert level and receipt. Audio VisualDiscreet backlit display...

These indicator panels use the larger style 20 digit LCD modules, the two rows of text are displayed using illuminated 12mm high characters. Each indicator panel has an integral sounder and includes a mute switch to silence the call tone for a...

Quantec Master Infrared Ceiling Receiver Part No. QT302RX Designed to accept infrared calls from compatible Quantec staff attack transmitters, patient neck/wrist pendants and staff attendance pendants. Typically used in bedrooms, corridors,...

Accessible Toilet Reset Point c/w Sounder Part No. NC809DBBT A remote reset point c/w sounder specifically designed for use in Accessible Toilet Alarm systems. Allows calls generated by an NC807C ceiling pull unit to be cancelled at source,...

Overdoor Light c/w Sounder Part No. NC806CS Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device. Indicates Standard calls via a constant...

Eliminate all cables with our new generation of fall prevention solutions! Upgrade your falls programme with the latest technology from Fall Savers®. The NEW Fall Savers® Wireless eliminates the cord between the monitor and floor...

The Safeguard transmitter provides a simple connection to assistive technology devices. It pairs wirelessly with the call system and can be individually programmed to raise the appropriate alert. The transmitter connects to a multitude of assistive...

With the same features as the NET207M, but requiring a magnetic key for the staff functions. This call point has the same features and functions as the NET205M with the addition of an infra-red sensor. This sensor can be activated using one of our...

10-20 Zone Expansion Unit for C-TEC Call Controllers Part No. NC910ES / NC920ES / NC910EF / NC920EF Expands the number of zones on a Call Controllers by 10 or 20 zones (dependent on model purchased). Flush mount or surface mount available...

The Touch Series Overdoor Lights provide an instant visual aid to nursing staff for alerts and calls from patient rooms. Located outside patient rooms and along corridors, the Overdoor Light provides a clear visual status of an alert as well as improving...

This lightweight pendant has the option of being worn either around the neck on a lanyard or with a MED103 watch strap. It is a portable nurse call product which can be programmed to transmit either a call, assistance or emergency type of event,...

Four Zone Call Controller (requires NC930 12V 250mA PSU) Part No. NC944 An attractively-designed four zone call controller c/w mute and reset buttons. Fully compatible with C-TEC's entire range of 800 Series Call System components. Capable...

Provides simple integration techniques to connect to third party devices to generate an event on the nurse call system. Typical applications include contacts from fire alarms or other control panels. IntegrationProvides an interface to third party...

One Isolator protects the output from the Controller, providing four current limited outputs to distribute the wiring for the nurse call system. SimplicityWith system topology based on decades of experience and reliability, the 2 wire Intercall Bus...

The Thermal Imaging Sensor monitors rooms where the resident is prone to falling or wandering at night. Positioned on the ceiling, the sensor can be adjusted to detect activity within a pre-defined area. This is generally set around the bed to detect and...

Addressable Sounder Part No. QT688 An addressable sounder designed to increase call indication levels in large Quantec sites.  Can be programmed to sound when certain groups of call points are calling. Sounder rate...

The S2 Air Switch is ideal for environments such as bathrooms and showers where water could make contact with the system. It is totally sealed and waterproof and since it uses air to trigger a call, it is completely safe to use. The S2 Air...

Used within the building, normally on the 1st floor, to build a radio footprint to the desired parameters of the system. The RTX then enables receivers and transmitters to be installed anywhere within those parameters or radio footprint. Technical...

Medicare’s 12-inch display panels include colour backlit screen, numeric or alphanumeric display option. Optional functions include location map setting, sounder, user-editable information, call accept, zoning, function buttons and call logging...