KP readers are a keypad and a proximity reader all in one. This allows card plus PIN (or code) access control with a single reader. KP readers are for use with Switch2 and Net2 systems. Installation The reader is wired as shown on the control unit...

XP95 Sounder Base with integral isolated mounting base. Designed for indoor use. Two Apollo Tones EN54-3 Sounder Selectable Volumes 55–75dB (A), 75–91dB (A) XP95 (works on Discovery & CoreProtocol) XPert7 Addressing 4" Isolated...

A metal housed keypad and proximity reader primarily for external use. It reads MIFARE 1k®, MIFARE 4k®, MIFARE Ultralight®, MIFARE Ultralight C®, MIFARE® DESFire® and MIFARE® DESFire® EV1 tokens...

KP readers are a keypad and a proximity reader all in one. This allows card plus PIN (or code) access control with a single reader. KP readers are for use with Switch2 and Net2 systems.  Installation The reader is wired as shown on the control...

The Proximity metal reader is for use with Switch2 and Net2 systems. It is contained in a cast metal housing with a satin chrome finish. The result is a smart, rugged reader. As the reader is already housed in metal, its operation is affected less by...

The Proximity P series MIFARE® reader is suitable for use with Net2 systems. The reader is multi-format and can be used with a choice of access tokens including MIFARE®Classic protocol ISO 14443A. It can also be used with EM4100 and Paxton...

P series readers are for use with Switch2 and Net2 systems. The P series readers are supplied with black fascias only. Replacement fascias are available in black and white/grey, and are free of charge to Paxton registered installers from the Extranet. P...

The 12V dc G Range, N Series power supplies has been designed for CCTV, access control and general purpose applications that require the use of a standby battery. This range has a regulated highly stable output supplying full rated current to load, plus...

The 12V dc G Range, N Series power supplies has been designed for CCTV, access control and general purpose applications that require the use of a standby battery. This range has a regulated highly stable output supplying full rated current to load, plus...

The 12V dc G Range, N Series power supplies has been designed for CCTV, access control and general purpose applications that require the use of a standby battery. This range has a regulated highly stable output supplying full rated current to load, plus...

The 12V dc G Range, N Series power supplies has been designed for CCTV, access control and general purpose applications that require the use of a standby battery. This range has a regulated highly stable output supplying full rated current to load, plus...

The DRW door retainers are exclusive to Cranford Controls, they combine good looks, high performance and economy in one new low profile package. With a flame retardant, low profile ABS plastic body and a curvy shape that closely matches the curves of...

The DRW door retainers are exclusive to Cranford Controls, they combine good looks, high performance and economy in one new low profile package. With a flame retardant, low profile ABS plastic body and a curvy shape that closely matches the curves of...

Manual override for access control and security systems. Green MCP Break glass operation Surface mounting

Standard stainless steel exit button The RTE-SS series of exit switches offer a flexible solution to provide exit triggering in a variety of applications. From medium to heavy traffic use, these push buttons are suitable for internal and external use...

Entry level surface 500kg magnetic lock, monitored The C-Line range of electromagnetic locks have been designed to provide a high performance and cost-effective solution to the competitive edge of the magnetic locking market. Each model...

Entry level surface 300kg double magnetic lock, monitored The C-Line range of electromagnetic locks have been designed to provide a high performance and cost-effective solution to the competitive edge of the magnetic locking market. Each model...

Entry level surface 300kg magnetic lock, monitored The C-Line range of electromagnetic locks have been designed to provide a high performance and cost-effective solution to the competitive edge of the magnetic locking market. Each model...

The Vanderbilt V42 is the best-selling codelock in the world. It is compact and easy to use with a modern design that is suitable for either indoor or outdoor mounting. The V42 has a capacity of two four-digit codes. One can be used by residents while...

Model YBN-R/3(WHT) is a common mounting base, which is fully compatible with Hochiki's ESP range of sensors, beacons, base sounders and VADs It is supplied with square cable clamps for secure and reliable cable termination and is also capable of driving...

Model ATJ-EN(SCI) is a Multi-Heat Sensor with SCI, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol. The ATJ-EN(SCI) incorporates a Variable Temperature heat element and a Rate of Rise heat element, both of which are...

Model ALN-EN(SCI) is a Photoelectric Smoke Sensor with SCI, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol. The ALN-EN(SCI) incorporates Hochiki’s newest High Performance Chamber Technology removing the need to use...

The XP95 Manual Call Point is commonly used to manually control extinguishant release.  EN 54-11 Certified Reports an alarm in under 0.2 seconds 'Plug and Play' terminal connections for faster wiring Continuity link for wiring test before...

The Intelligent Input/Output Module is used to monitor two single pole, volt free contact inputs and control mains switching relay output contacts.  EN 54-17 & EN 54-18 Certified Two input channels Meets BS 7273-4 failsafe...

The Intelligent Input/Output Module is used to monitor single pole, volt free contact inputs and control relay output contacts.  EN 54-17 & EN 54-18 Certified Meets BS 7273-4 failsafe requirements Ergonomic design for ease of wiring and...

The XP95 Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires.  Reliable fire detection in areas with a wide temperature range from -20°C to +60°C Ideal...

The XP95 Heat Detector (A2S) monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature, reporting an alarm at 55°C.  Reliable fire detection in areas with a wide temperature...

XP95 Sounder Visual Indicator Base with integral isolated mounting base. Designed for indoor use.  Two-Tone EN54-3 Sounder Selectable Volumes 55–75dB (A), 75–91dB (A) Visual Indicator Beacon (Red-Flash) XP95 (works on Discovery...

The XPERT 7 Base is a low insertion force base with stainless steel contacts allowing easy and quick installation.  XPERT addressing XPERT cards supplied with all bases Locking feature to prevent unauthorised detector removal Ideal for the...

The Series 65 Optical Smoke Detector uses light sensing technology to “see” smoke entering the chamber. The external detector moulding is identical to that of the ionisation detector, and has an indicator LED which is clear in quiescent state...

The Series 65 Heat Detector uses a dual thermistor network to monitor temperature.  Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty, smoky or steamy under natural conditions Flashing LED...

The base is designed for use with conventional systems that have manual call points and detector bases on the same circuit. The base is fitted with a Schottky diode on the "L1 IN" and "L1 OUT" wiring terminals. This base can be used with compatible...

Slave Infra Red Receivers are used to provide infrared reception cover in additional areas in one room or ward where each individual receiver does not require a separate identity on the call system. Units must be wired back to a standard call point to...

The beating heart of the Touch nurse call system, providing the power for the Touch devices and the link to the IP network for system programming and automatic call logging. SecurityPassword protected access and back up battery. ProgrammingIntuitive...

The G822 addressable call point can generate six levels of call. There is also a call follower sounder which sounds when the call point is in ‘staff present’ mode, to inform staff of another call on the system. The extended input terminals...

The G746 Overdoor Light Unit is an optional item usually located above a door, at the end of a corridor or at a corridor junction. It will indicate the status of the IR receiver within a room or as an indicator of which direction to follow when...

The Push Button Switch is a pressure-activated button designed for residents who struggle to exert force or manipulate objects in a way that prevents them from using conventional call aids. The user can simply use their finger or hand to...

Specifically developed to generate alarms from bathrooms, toilets and en-suites. The unit is ceiling mounted and features a 3m floor length cord terminated with two easy to pull handles. It also incorporates reassurance indicators, which...

The Touch Wearable Neck Pendant is a stylish portable call device that’s ideal for both care home residents and assisted living inhabitants. Its lightweight, comfortable design allows users to get on with their day-to-day lives safe in the...

Mains power supply for the Wireless PIR Infrared Detector.