NC 800 Series

Replacement locking nut for the C-TEC range of nurse call including Quantec and NC 800. Pack of 10 locking jacknuts.

4.2m (14ft) Tail Call Lead Part No. NC805C/14 A long 4.2m tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc. Comprises a pear-shaped...

1.8m (6ft) Tail Call Lead Part No. NC805C/6 A short 1.8m tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc. Comprises a pear-shaped...

Type a description for this product here...

Ceiling Pull Unit Part No. QT607 Can be used to generate a Standard or Ensuite call on a Quantec Addressable Call System. Typically wired as a slave to a Quantec Addressable Call Point or Quantec Accessible Toilet Reset Point...

Ceiling Pull Cord Unit Part No. NC807C Can be used to generate a standard call on an 800 Series Conventional Call System. Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be cancelled. Supplied...

Button Reset Point Part No. NC809DB A button-operated reset point for use with C-TEC's 800 Series Call System. Can be used to remotely cancel standard calls generated from ceiling pulls and/or wall call points that are wired on...

Accessible Disabled Persons Toilet Alarm Kit Part No. NC951 The UK's market-leading Disabled Persons Toilet Alarm kit. Includes everything required for a BS8300 clause compliant emergency assistance alarm. Attractively designed, easy to...

Overdoor Light Part No. NC806C Provides visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device. Indicates Standard calls via a constant red light and Emergency calls via...

Extendable Call Lead 1.2-3.6m (4-12ft)  Part No. NC805D An extendable coiled tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc...

Emergency Call Point, Button Reset c/w Remote Socket Part No. NC802DEB-1/2 An attractively designed button-operated call/reset point capable of generating Standard and Emergency calls on an 800 Series Call System. Includes a 6.35mm jack...

Isolatable Monitoring Point, Button Reset Part No. NC894DKB A keyswitch-isolatable monitoring point c/w magnetic door contacts for use with C-TEC's 800 Series Call System. Can be used to monitor any device with a normally open or normally...

Remote Sounder Part No. NC888D Can be connected to any multi-zone 800 Series Call Controller, Master Indicator Panel or Switchable Sounder to increase call indication levels. Indicates Standard calls via a constant tone and Emergency...

20 Zone Master Call Controller c/w 300mA PSU Part No. NC920F / NC920S Compatible with C-TEC’s entire range of 800 Series field devices. Housed in an attractive flush mounting plastic enclosure measuring just 214mm x 178mm or...

Stainless Steel Emergency Assistance Alarm Kit Part No. NC951/SS A high-quality brushed stainless steel single zone emergency assistance alarm. Attractively designed, easy to install and simple to use. Allows a distressed person to...

Pack of 10 magnetic reset tokens for the Quantec and 800 Series nurse call system. Comes with a handy keyring attachment. Used to reset call points and door monitor points that use a magnetic reset button.

Quantec Programming Software Part No. QT707 PC programming tools for use with C-TEC's Quantec addressable call system. Intuitive and easy-to-use with comprehensive Help files. Requires a PC running Windows XP, Vista, 7 or 8. Kit includes...

Accessible Toilet Reset Point c/w Sounder Part No. NC809DBBT A remote reset point c/w sounder specifically designed for use in Accessible Toilet Alarm systems. Allows calls generated by an NC807C ceiling pull unit to be cancelled at source,...

Overdoor Light c/w Sounder Part No. NC806CS Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device. Indicates Standard calls via a constant...

10-20 Zone Expansion Unit for C-TEC Call Controllers Part No. NC910ES / NC920ES / NC910EF / NC920EF Expands the number of zones on a Call Controllers by 10 or 20 zones (dependent on model purchased). Flush mount or surface mount available...

Four Zone Call Controller (requires NC930 12V 250mA PSU) Part No. NC944 An attractively-designed four zone call controller c/w mute and reset buttons. Fully compatible with C-TEC's entire range of 800 Series Call System components. Capable...

Flush Mounting Bezel for QT601-2 Quantec Controllers Part No. QT385 Allows Quantec Controllers to be semi-flush mounted. Attractive slimline design. Finished in mild steel. Front face when in situ measures 456 W x 293 H mm...

Keyswitch Reset Point Part No. NC899IRR A secure keyswitch-operated reset point specifically designed to cancel Emergency calls generated by an NC302RXC master infrared ceiling receiver. To operate, momentarily turn the...

Magnetic Reset Point Part No. NC809DM A magnetic key-operated reset point for use with C-TEC's 800 Series Call System. Can be used to remotely and securely cancel standard calls generated from ceiling pulls and/or wall call points...

Emergency Only Call Point, Button Reset Part No. NC804DE A button-operated call/reset point capable of generating Emergency calls on an 800 Series Call System. Onboard reset button cancels Emergency calls made from the...

Emergency Infrared Call Point, Magnetic Reset c/w Remote Socket Part No. NC802DERM A button operated call point c/w infrared receiver capable of generating Standard and Emergency calls on an 800 Series Call System. Includes a magnetic reset...

Emergency Infrared Call Point, Button Reset c/w Remote Socket Part No. NC802DERB A button operated call/reset point c/w infrared receiver capable of generating Standard and Emergency calls on an 800 Series Call System. Onboard infrared...

Switchable Sounder Part No. NC887D Can be connected to any multi-zone 800 Series Call Controller or Master Indicator Panel to increase call indication levels. Indicates Standard calls via a constant tone and Emergency calls via a...

30 Zone Emergency Indicator Panel A 30 Zone Emergency Indicator Panel c/w 12V 400mA PSUs Fully compatible with C-TEC's entire range of 800 Series Call System components Capable of indicating standard (constant tone) and emergency (intermittent...

10 Zone Master Call Controller c/w 300mA PSU Part No. NC910S / NC910F Compatible with C-TEC’s entire range of 800 Series field devices. Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm...

12V 250mA Double Gang PSU Part No. NC930 A compact 12V 250mA double gang power supply unit. Can provide power to up two NC944 Four Zone Call Controllers. Suitable for use in many other applications. Includes a green power on...

Stainless Steel Single Zone Call Controller c/w 12V PSU Part No. NC941/SS A high-quality brushed stainless steel single zone call controller c/w a 12V 250mA PSU. Fully compatible with C-TEC's entire range of 800 Series Call System...

Single Zone Call Controller c/w 12V 140mA PSU Part No. NC943B A single zone call controller c/w a 12V 140mA PSU and standby battery. Compatible with C-TEC's entire range of 800 Series Call System components. Capable of indicating standard...

Rechargeable IR/RF Transmitter (push for call, pull for attack) Part No. QT412RXCA Allows staff to remotely trigger Attack and Standard calls via a Quantec infrared call point, ceiling receiver or radio receiver. Can also be used on 800...

Rechargeable IR/RF Transmitter (push/pull for attack) Part No. QT412RXA Allows staff working in high-risk environments to remotely trigger an Attack call via a Quantec infrared call point, ceiling receiver or radio receiver Can also be used...