Nurse Call Systems

The multi functional wearable allows the user to make a call, as well as alerting staff if they suffer a fall.

The Display Panel features a large, clear, wide viewing angle display with volume control, standby battery and fitted on a swivel bracket.

The Display Panel features a large, clear, wide viewing angle display with volume control, standby battery and fitted on a swivel bracket.

This lightweight pendant comes with a wrist or neck anti-ligature lanyard, giving you flexibility in tailoring your approach to care and offering independence to your residents. The pendant is IP67 rated and is both water resistant and dust-proof.

The Door Contact is installed onto the door and activates when the door is opened. A key operator timer system gives staff the ability to pass through the door without it alarming.

The Door Contact is installed onto the door and activates when the door is opened. A key operator timer system gives staff the ability to pass through the door without it alarming.

The Altra Call Lite allows calls from users and staff. Typical Staff call types include Assistance, Emergency, Visit and Staff Present.

The Altra MiniTouch is ideal for communal areas, allowing staff to view multiple calls on screen at once and enabling them to decide the most appropriate response. Can be flush mounted on the wall or fitted on a swivel bracket.

The Altra Touch gives you the ability to personalise your Nurse Call System, enabling you to safeguard your home / hospital by managing your call data for evidencing.

Allows patients / residents to make a call with ease from the bedside. Designed for the Courtney Thorne Economy+ system.

Allows patients / residents to make a call with ease from the bedside. IP67 as standard - designed to withstand complete immersion and is completely dust proof. 2.5m length.

10-20 Zone Expansion Unit for C-TEC Call Controllers Part No. NC910ES / NC920ES / NC910EF / NC920EF Expands the number of zones on a Call Controllers by 10 or 20 zones (dependent on model purchased). Flush mount or surface mount available...

Ceiling Pull Cord Unit Part No. NC807C Can be used to generate a standard call on an 800 Series Conventional Call System. Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be cancelled. Supplied...

Extendable Call Lead 1.2-3.6m (4-12ft)  Part No. NC805D An extendable coiled tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc...

4.2m (14ft) Tail Call Lead Part No. NC805C/14 A long 4.2m tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc. Comprises a pear-shaped...

1.8m (6ft) Tail Call Lead Part No. NC805C/6 A short 1.8m tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc. Comprises a pear-shaped...

Infrared Patient Wrist Pendant (push for call) Part No. QT432W Allows patients in bedrooms and communal areas to remotely trigger standard calls via a Quantec infrared call point, ceiling receiver or radio receiver Supplied on an...

Infrared Attendance Pendant (push for attendance) Part No. QT432A Allows nursing or security staff entering rooms during night shifts, etc., to log their attendance. Upon activation, the infrared call point or ceiling receiver that picks up...

Infrared Patient Neck Pendant (push for call) Part No. QT432 Allows patients in bedrooms and communal areas to remotely trigger standard calls via a Quantec infrared call point, ceiling receiver or radio receiver Alleviates the need for...

Rechargeable IR/RF Transmitter (push for call, pull for attack) Part No. QT412RXCA Allows staff to remotely trigger Attack and Standard calls via a Quantec infrared call point, ceiling receiver or radio receiver. Can also be used on 800...

Rechargeable IR/RF Transmitter (push/pull for attack) Part No. QT412RXA Allows staff working in high-risk environments to remotely trigger an Attack call via a Quantec infrared call point, ceiling receiver or radio receiver Can also be used...

Ceiling Pull Unit Part No. QT607 Can be used to generate a Standard or Ensuite call on a Quantec Addressable Call System. Typically wired as a slave to a Quantec Addressable Call Point or Quantec Accessible Toilet Reset Point...

Addressable Sounder Part No. QT688 An addressable sounder designed to increase call indication levels in large Quantec sites.  Can be programmed to sound when certain groups of call points are calling. Sounder rate...

Nurse call unit NET205M Usually located at each bed-head, the NET205M call point features a large orange button, which is used by patients when in need of assistance. Staff attending a call can raise a more urgent staff-to-staff call to summon help if...

Neck pendant for the SAS Network II nurse call system. This infra-red transmitter is ideal for patients to use as it has a large orange button that is easy to press. Used in conjunction with the SAS range of nurse call points with an built-in infra-red...

Call lead for the SAS Network II nurse call system. Designed to plug into the SAS range of nurse call units. It comes equipped with a sturdy 2.5m lead with moulded jack plug. A large orange button is provided for the patient to press with a finger or...

Replacement battery for the Intercall TIR4 neck pendant. Can be easily changed by a maintenance person on site.

Detects the first signs of bed wetting and raises an alarm either locally in the room or via the nurse call system so that staff can respond. The sensor mat is placed underneath the bed sheet and is connected to the control unit. When the sensor detects...

Our range of anti-ligature pull cord strings are designed to replace your existing fabric cord with a hygienic, wipe clean-cord designed to improve infection control and improve safety. The smooth vinyl cord features punched holes every 15cm that break...

Our range of anti-ligature pull cord strings are designed to replace your existing fabric cord with a hygienic, wipe clean-cord designed to improve infection control and improve safety. The smooth vinyl cord features punched holes every 15cm that break...

Plastic belt holster for the EZ-2028 alphanumeric pager. Protects the pager from damage and clips to your belt or clothing to allow the pager to be carried around safely.

The wireless PIR uses infrared detection technology to help carers reduce the risk of falls. This monitor can be mounted on a door or by the bedside to trigger an alert when a person breaks the infrared beam. The device works by emitting a...

Replacement pull cord string and handles for use with ceiling mounted pull cords. Simply replace the standard fabric cord with this easy to clean plastic version. Features a 3m length of wipe clean plastic cord and 2 plastic handles...

Replacement pillow clips for use with the 2m and 4m Pear Leads. Suitable for use with: - Intercall NP2 and NP4 - eZone SSD-P2 and SSD-P4

Used to reset the Intercall L733 magnetic door monitor point as well as L622M magnetic call points. A strong magnet on a keychain, designed to be carried by staff members so they can reset the system.

Surface mounting back box designed for the Intercall range of double gang displays and call points. Works with: L628 Display L758 Display L672 Dementia Controller L762 Call Point with Display L752 Speech Call Point FJB2 Fused Junction Box L747 Interface...

Extend the range of your accessories with the Intercall extension lead. Simply plug one end into the call point and plug your chosen accessory into the other, increasing the distance at which it can be used. Perfect for larger bedrooms or communal areas...

Extend the range of your accessories with the Intercall extension lead. Simply plug one end into the call point and plug your chosen accessory into the other, increasing the distance at which it can be used. Perfect for larger bedrooms or communal areas...

Allows for 2 items to be plugged into the nurse call system at once. No more constant swapping of accessories, simply plug the adaptor into the call point and connect both of your accessories to the sockets on the other end. Comes with a 2m lead.

Receive notification when a client begins to wander with our heavy duty floor sensor mat. The SSD-PM2 is a robust, long-life floor pressure mat and is most effective when placed at the bedside or doorway; activating the alarm when a user leaves...